The X-Terra 50 is packed with advanced functions and options designed to optimize your success when hunting for buried treasures. The X-Terra 50 is very lightweight, weighing just 2.8 pounds and it is designed to give you great balance and ease of use. Gone are the days of getting sore and aching muscles from lugging around a heavy detector.

The Minelab X-Terra 50 has a big and easy to read LCD display with an internal speaker. It features multi-segment notching for accepting or rejecting a target and the discrimination settings can be customized and tailored to your personal hunting preferences.

The highly sensitive and waterproof coil will give you great depth reading. The control panel on the Minelab X-Terra 50 is big and easy to read and has a battery and depth indicator. It comes equipped with two pre-programmed search patterns and has fast recovery Pin-Point with variable tones and graphical indicators. You will be told exactly where the target is.

The X-Terra 50 runs on 4 AA batteries and it accepts coils at two different frequencies. The standard 7.5kHz to locate those bigger and deeper targets and 18.75kHz (optional) to find the smaller and more shallow targets.

The Minelab X-Terra 50 is designed tough and it can perform in rough terrains, on wet sand and in thick underbrush with ease.

Minelab is a leader in metal detectors and they strive to use the latest, cutting edge technology that's available to create highly effective detectors. The X-Terra 50 has enough features built in to more then satisfy the experienced treasure hunter, and can be easily learned how to operate by the novice.

The X-Terra 70 is a clever machine, yet it's simple to use interface makes it a good detector for the beginner or the most experienced user.

The two detection modes of coin and relic and prospecting provide you with endless treasure hunting possibilities. It has two ground balance modes-normal and salt water beach so you are guaranteed results on dry land or at the beach. You have the choice of three ground balance adjustment modes-manual, auto and track. The target identification is done on the digital numeric display and by tone.

There are five depth indication icons on the display, so you'll know how deep the target is buried. The sensitivity adjustment is varied from 1 to 30 and the volume adjustment is sensitive and wide-ranging. The LCD display is large and easy to view. A headphone jack is built-in and the machine operates with 4 AA batteries.

The Minelab X-Terra 70 was designed with your comfort in mind. It is lightweight (2.9 pounds), has a padded armrest and it's stem is adjustable and comes with a stand and arm strap. No more sore muscles with this lightweight and user-friendly detector.

Join the goldrush and take the Minelab X-Terra 70 along with you and you'll be finding those lost, buried treasures in no time at all.

The Sovereign GT is super lightweight (20.3 ounces) and built rugged. The Tornado TM coil system is also lightweight, waterproof plus non-buoyant. It can be used virtually anywhere you want to take it. The coil has it's own built-in circuitry which adds more power and depth readings to this already great detector. You won't waste time finding 'trash items' with the Sovereign GT as it's discrimination circuitry allows you to get rid of the signals from trash items. It's unique Iron Mask feature lets you still search for valuables on grounds containing iron junk.

The search coil is a nice ten inches in diameter and comes with a scuff cover for protection. You'll get a standard speaker as well as a earphone jack. Earphone use is encouraged as you will hear more of the alerts and all background noise will be eliminated.

The Minelab Sovereign GT operates on 8 AA batteries. The control panel is conveniently placed on the unit and all controls are easy to reach and easy to understand. The Sovereign GT is an outstanding metal detector that leads the pack. It is loaded with just the right features needed to get you on the road to finding lost and buried treasures.

The Minelab Sovereign GT utilizes 'ACCU-TRAK' automatic ground tracking to ensure great results. This metal detector really gets the job done.

The Explorer SE's FBS technology automatically transmits 28 multiple frequencies simultaneously from 1.5kHz to 100kHz. The lower the frequency the deeper the detector can penetrate. With it's increased frequency range, the Explorer SE will accurately ID the targets at greater and impressive depths.

This FBS technology also improves the Explorer SE's ability to cancel ground mineralization. Ground mineralization can prove to be big problems for many metal detectors, but not for the Explorer SE. Ground balancing is automatic with the Minelab Explorer SE, so whatever the field conditions, the Explorer will maximize the depth, sensitivity and discrimination. Couldn't be simpler. The perfectly balanced Explorer SE operates on eight AA batteries and comes with full function, advanced programming and a powerful microprocessor built right in.

It has a full ferrous Iron Mask discrimination features so it cannot be bothered or fooled by poor or junk targets.

Minelab Explorer SE Pro List Price: $1,495.00 Sale Price: $1,299.00 You save: $196.00 (13%) Availability: Usually ships in 24 hours   Eligible for free shipping! 9 new from $1,299.00

The Explorer SE is easy to learn to operate and comes with a handy Quick Start mode so you can begin hunting soon after taking the detector out of it's package. The user interface is intuitive and the display is easy to read.

The Explorer SE can, and does find deep coins with amazing precision. You can sweep an area with a lesser detector and get no hits, then re-sweep with the Minelab Explorer SE and you'll get hits and will find the coins the others missed. It's that good.

So, if you're serious about detecting, then give the Minelab Explorer SE a try. You'll be glad you did.

The Minelab Excalibur is an amphibious detector that moves easily from land to the water effortlessly. Never again will you get false signals with the Excalibur. The coil is slim and light in weight, making it much easier to handle then many of it's competitor's in it's class.

The signal response on the Minelab Excalibur is impressive and it performs incredibly well in salt water. The Minelab Excalibur has an optional side mount shaft that is perfect for shallow water and wading. The Excalibur was conveniently designed to be used either in or out of the water so there is no need to have two metal detectors-one for land and another for the sea. You can work the beach, wade in the surf or explore a shipwreck at depths up to 200 feet with this unit and get great results any way.

Metal detecting is a fascinating past time, but if your equipment falls short in performance, the hobby could quickly lose it's appeal. Not a worry if you purchase a Minelab Excalibur. The Excalibur will not disappoint as it is highly sensitive and can detect the targets hidden in the muck of the bottom of a lake or in the deepest canyon.

The Excalibur has been a favorite among divers for years. It is very advanced but does not have too many controls that need constant adjustment. The Excalibur will operate at it's maximum performance without having to manually ground the balance over and over again.

Minelab's one-of-a kind, triple frequency technology makes treasure hunting easier then every before! The Minelab Eureka uses Minelab's "Accu-Trak" Digital Ground Balance with a switchable 2 speed recovery. And combined with the new micro-processor controlled discrimination circuitry all of the guesswork is taken out of detecting for gold, which means you will find more gold in less time.

Hot rocks can be a problem for a lot of metal detectors, but not for the Minelab Eureka. It simply pushes through soil with a high mineral content. No problem for the Eureka. So if you are serious about really FINDING gold, do not settle for anything less then the Minelab Eureka. It sports a 10 inch coil which provides good coverage for each sweep you take.

The unit weighs only 740 grams and can adjust in length so it makes it perfect for anyone to use. There is nothing worse then lugging an over-sized and heavy metal detector out for the day, only to return home exhausted. The Minelab Eureka was made to be taken along anywhere and designed to find the small hidden treasures buried in the ground that can be found nearly everywhere.

Buy the Minelab Eureka and get results.

Minelab has broken new ground in the detector world by incorporating a USB interface, which allows you to download and upload E-Trac settings from your computer. The Minelab E-Trac can locate valuable metal objects in all types of of mineralised ground conditions like extremely salty soils, sea water, wet beach sand and even highly magnetic ground conditions. The E-Trac was designed to work under the toughest conditions and it proves to do just that over and over again.

If you want a machine that has a proven track record and you do not want to come home empty-handed, then pick up a Minelab E-Trac. You will not be disappointed.

With the Minelab E-Trac you are able to pinpoint your targets using the built-in audio and visual indicators. No more missed targets with the E Trac.

Minelab E-Trac Metal Detector List Price: $1,895.00 Sale Price: $1,549.00 You save: $346.00 (18%) Availability: Usually ships in 24 hours   Eligible for free shipping! 10 new from $1,549.00

The E-Trac is comfortable to use as it's handle is ergonomic and balanced perfectly to ensure that the time spent holding the E-Trac are comfortable.

The interface on the Minelab E-Trac is logical and easy to read and understand. The innovative icons are enhanced and the display unit has a clear resolution that was designed for optimum visibility in all lighting conditions.

The Minelab E-Trac is the ultimate in metal detectors. If you want the best and won't settle for anything less, then look no further then the Minelab E-Trac. The detector that works hard so you don't have to.

With the feature-packed Minelab GPX-4500 you get some elements such as the SETA (Smart Electronic Timing Alignment). This provides less interference and is a much quieter operation and a more stable threshold. Two more timing options are added to the original four on the GPX-4000. These are "Enhance" and Sharp." The GPX-4500 comes with new custom modes and a ground balance 'off' feature. The discrimination ability has been improved on the GPX-4500 and the volume limit feature is improved with 1 to 20 range.

Minelab Gpx-4500 Gold Prospecting Metal Detector List Price: $5,595.00

In order to save on battery power, the Minelab GPX-4500 has a new backlit control box with a time-out feature.

You will be sure to find the 'good targets' with the improved "Iron Reject" adjustments.

The Minelab GPX-4500 has a audio amplier that boosts target signals which helps you to hear the deep gold nuggest easier.

If you want to get a piece of the action that treasure hunting provides, pick up a Minelab GPX-4500 metal detector and get out there and start hunting. The GPX-4500 is a perfect detector for the family, the weekend adventurer or the 'professional' treasure hunter.

The Minelab Safari uses Minelab's FBS multiple frequency technology, meaning that the Safari provides it's user with deep, sensitive and accurate detecting.

The Minelab Safari is ready to impress, so just head out to your local park, beach or the abadoned farm, and power it up. You will be digging up old coins and jewelry in no time flat with the Safari. The Safari will even find treasures on a saltwater beach, so take it along to the ocean and find some ancient coins that have washed ashore. Washed up coins can be very valuable, so don't miss out. The Minelab Safari uses a digital target ID that delivers deep, accurate information on the targets you're searching for.

Most metal detectors on the market today operate on a single (or dual) frequency, ranging from 1 to 70 kilohertz(kHz). Minelab's scientists discovered that a frequency that worked good in one area often would not produce results in another location. Minerals in the ground, trash or garbage content and target size all had an effect on how effective a detector transmitting a single frequency would operate.

Minelab Safari Metal Detector List Price: $1,195.00 Sale Price: $895.00 You save: $300.00 (25%) Availability: Usually ships in 1-2 business days   Eligible for free shipping! 8 new from $895.00

The Minelab Safari's lightweight 11 inch coil gives you high performance, depth and pin-point targeting. The Safari comes with four detection modes and it sports a fully automatic and manual sensitivity control option and pinpoints the target with audio and visual indicators.

False signals are fewer with the Safari and the noise cancel feature automatically will select the quietest and best channel for detecting.

The Minelab Safari metal detector is a good, solid metal detector that you can rely on.